New John Deere 2430C Nutrient Applicator

Specifications

Working widths	19 row: 14.5 m 47.5 ft 25 row: 19.1 m 62.5 ft
Number of rows	19, 25
Row spacing	762 mm 30 in.
Transport width	19 row: 6 m 19 ft, 8 in. 25 row: 5.5 m 18 ft, 2 in.
Transport height	19 row: 4.3 m 14 ft, 1 in. 25 row: 4.3 m 14 ft
Overall length	9.75 m 32 ft
Centerframe width	19 row and 25 row: 3.66 m 12 ft
Fold type	Five-section fold
Machine weight - conventional	19 row, with optional closing disks and coulters: 11,939 kg 26,320 lb 25 row, with optional closing disks and coulters: 13,608 kg 30,000 lb
Machine weight - chisel

Working widths	19 row: 14.5 m 47.5 ft 25 row: 19.1 m 62.5 ft
Transport width	19 row: 6 m 19 ft, 8 in. 25 row: 5.5 m 18 ft, 2 in.
Transport height	19 row: 4.3 m 14 ft, 1 in. 25 row: 4.3 m 14 ft
Overall length	9.75 m 32 ft
Centerframe width	19 row and 25 row: 3.66 m 12 ft

Number of rows	19, 25
Row spacing	762 mm 30 in.
Fold type	Five-section fold

Machine weight	conventional 19 row, with optional closing disks and coulters: 11,939 kg 26,320 lb 25 row, with optional closing disks and coulters: 13,608 kg 30,000 lb

Fore-and-aft clearance	3.4 m 134 in.
Underframe clearance	Fully raised: 1100 mm 44 in.

Blade diameter	560 x 4.5 mm 22 x 0.177 in.
Blade spacing	762 mm 30 in.
Coulter down force	2669 N 600 lbf

Standard options	Conventional knife options with coulters and closing disks Conventional or mole knife Tru-Depth™ conventional
Number of standards	19, 25
Standard spacing	762 mm 30 in.
Standard Operating depth range	76 to 305 mm 3 to 12 in.
Standard trip force	5560 N 1250 lbf
Standard trip height	280 mm 11 in.

Blade type	Concave notched
Disk blade diameter	460 x 3 mm 18 x 0.118 in.
Mounting	Independently mounted arms with pin adjustment
Adjustments
Side to side adjustment range	220 to 460 mm 8.8 to 17 in.
Trip height	465 mm 19.5 in.
Max down pressure	222 N 50 lbf

Depth control system	TruSet depth control system and single-point depth control system
Hitch system	Pull type: Floating hitch Rigid T-hitch - 6 x 12 in. 152 x 305 mm
Frame flex	10 degrees up / 15 degrees down
Hitch link	Category 4 or 5
Rear hitch	Fore/aft and side-to-side adjustable drawbar
Rear hitch maximum gross vehicle weight (GVW)	11,300 kg 25,000 lb

Wheel mounting	Castering front with walk-over tandem rear
Tire configuration	19 row: Mainframe tires: 320/70R15 145D (six) Inner wing tires: 320/70R15 145D (two) 280/70R15 134D (four) Outer wing tires: 280/70R15 134D (six) 25 row: Mainframe tires: 320/70R15 145D (six) Inner wing tires: 320/70R15 145D (six) Outer wing tires: 500/40R16 153A8/B (two)

Engine horsepower requirement	19 row: 268.5 to 387.8 kW 360 to 520 hp 25 row: 372.8 to 462.3 kW 500 to 620 hp
Operating speed	8 to 16 km/h 5 to 10 mph
Selective control valves (SCVs) required	Two